|
Title: After each GTAW bead is completed on a fillet weld, what must be done to the bead prior to starting ... Post by: christopher mar on Feb 23, 2018 After each GTAW bead is completed on a fillet weld, what must be done to the bead prior to starting the next
bead? a. Let it cool. b. Preheat it. c. Clean it with a grinder. d. Clean it with a wire brush. [Ques. 2] When making a GTAW fillet weld in the horizontal (2F) position, pay close attention to the _ a. weld starts b. torch angles c. weld terminations d. percentage [Ques. 3] When running the fourth bead of a GTAW fillet weld in the 1F position, how much of the second bead should you overlap? a. 1/4 b. 1/3 c. 1/2 d. 3/4 [Ques. 4] When terminating a GTAW weld, the crater must be filled to the full cross section of the weld to prevent _____. a. cracking b. overfill c. melt-through d. root fusio [Ques. 5] The welding procedure that is done by working the weld puddle back and forth across the axis of the weld, producing a weld bead much wider than the puddle width, is the _____. a. stringer bead b. weave bead c. groove weld d. fillet weld Title: After each GTAW bead is completed on a fillet weld, what must be done to the bead prior to starting ... Post by: AmanBhutani on Feb 23, 2018 Title: After each GTAW bead is completed on a fillet weld, what must be done to the bead prior to starting ... Post by: christopher mar on Feb 23, 2018 Such an awesome helper!
|