|
Title: Higher shielding gas flow rates are required with _____. Post by: jlam10 on Feb 23, 2018 Higher shielding gas flow rates are required with _____.
a. welds in deep grooves b. low welding currents c. slow advance speeds d. larger nozzles [Ques. 2] Ceriated and lanthanated electrodes are used as non-radioactive substitutes for _____. a. truncated filler metals b. transformer rectifiers c. thoriated electrodes d. flux cored rods [Ques. 3] GTAW commonly uses the same power sources and welding machines used for _____. a. gas metal arc welding (GMAW) b. shielded metal arc welding (SMAW) c. self-shielded flux-cored arc welding (FCAW-S) d. gas-shielded flux-cored arc welding (FCAW-G) [Ques. 4] Titanium becomes sensitive to embrittlement by oxygen, nitrogen, and hydrogen at temperatures above _____. a. 500F (260C) b. 1,000F (538C) c. 6,000F (3,316C) d. 10,000F (5,538C) [Ques. 5] Which welding process is recommended for the repair of a defect on clean magnesium castings? a. SMAW b. GMAW c. GTAW d. FCAW Title: Higher shielding gas flow rates are required with _____. Post by: amyarango11 on Feb 23, 2018 Title: Higher shielding gas flow rates are required with _____. Post by: jlam10 on Feb 23, 2018 Thank you soooo very much, it was really helpful and kind of you to answer my q's
Title: Higher shielding gas flow rates are required with _____. Post by: amyarango11 on Feb 23, 2018 You're welcome, once again
|