|
Title: The typical shielding gas for GTAW on deoxidized copper that is over 1/8 (3.2 mm) thick is _____. ... Post by: madisenjames on Feb 23, 2018 The typical shielding gas for GTAW on deoxidized copper that is over 1/8 (3.2 mm) thick is _____.
A) hydrogen B) argon C) oxygen D) helium [Ques. 2] ________ comes in a strip version and as laminated strips forming blocks from 6 to 24 square. Herringbone, basket, chevron, and other classic patterns are possible. A) Parquet B) Wood strip flooring C) Resilient flooring D) Wood plank flooring [Ques. 3] Which one of the following is not a hardwood typically chosen as finish flooring? A) Maple B) Hemlock C) Oak D) Walnut [Ques. 4] Which one of the following is not an exotic wood typically chosen as finish flooring? A) Caribbean walnut B) Brazilian teak C) Ipe D) Maple [Ques. 5] ________ are slats of pressure-treated wood that create a fastening point for wood flooring. A) Underlayments B) Sleepers C) Laminates D) Floor planks Title: The typical shielding gas for GTAW on deoxidized copper that is over 1/8 (3.2 mm) thick is _____. ... Post by: 123abcanswers on Feb 23, 2018 Content hidden
Title: The typical shielding gas for GTAW on deoxidized copper that is over 1/8 (3.2 mm) thick is _____. ... Post by: madisenjames on Feb 23, 2018 Wow! Thanks you for this correct set of answers, wasn't expecting it
Title: The typical shielding gas for GTAW on deoxidized copper that is over 1/8 (3.2 mm) thick is _____. ... Post by: 123abcanswers on Feb 23, 2018 My pleasure!
|