|
Title: When making welds on stainless-steel plate in the flat (1G) position, the interpass temperature ... Post by: jessicakissinge on Feb 23, 2018 When making welds on stainless-steel plate in the flat (1G) position, the interpass temperature should
typically not exceed _____. a. 300F (149C) b. 350F (177C) c. 400F (204C) d. 450F (232C) [Ques. 2] When welding stainless-steel pipe in the 5G position, start the welds _____. a. at the top of the pipe b. at the bottom of the pipe c. 45 degrees from the top d. 90 degrees from the top [Ques. 3] When applying the remaining passes on open-root V-groove pipe welds, they should be done using _____. a. weave beads and a slight side-to-side motion b. weave beads and 45-degree work angle c. stringer beads and a 45-degree work angle d. stringer beads and a slight side-to-side motion [Ques. 4] To fuse the weld when performing an overhead open-root V-groove weld on plate, adjust the _____. a. clamps b. weld position c. electrode work angle d. electrode drag angle [Ques. 5] When performing an open-root V-groove weld in the 1G position, the drag angle should be _____. a. 1 to 5 degrees b. 5 to 10 degrees c. 10 to 15 degrees d. 15 to 20 degrees Title: When making welds on stainless-steel plate in the flat (1G) position, the interpass temperature ... Post by: jekoof on Feb 23, 2018 Content hidden
Title: When making welds on stainless-steel plate in the flat (1G) position, the interpass temperature ... Post by: jessicakissinge on Feb 23, 2018 Bravo! This is awesome
Title: When making welds on stainless-steel plate in the flat (1G) position, the interpass temperature ... Post by: jekoof on Feb 23, 2018 Glad my efforts were helpful
|