|
Title: If the tungsten electrode touches the filler metal during welding, the welder must _____. Post by: LU DEE on Feb 23, 2018 If the tungsten electrode touches the filler metal during welding, the welder must _____.
A) touch the electrode to the weld puddle B) increase the push angle C) discard the electrode D) remove and clean the electrode [Ques. 2] Which of the following is not one of the two most common types of fasteners for tongue and grow wood flooring? A) Staples B) Finish nails C) Cleat nails [Ques. 3] Dampproofing and waterproofing mean the same thing. Indicate whether the statement is true or false [Ques. 4] What flashing valleys on roofs that are covered with wood shakes or shingles, 30 underlayment and a sheet of ________ gauge galvanized metal should be used. A) 26 B) 18 C) 30 D) 12 [Ques. 5] When a valley weave is used as valley flashing during the application of shingles across a valley on an intersecting roof, which type of technique is being used? A) Open valley B) Closed valley Title: If the tungsten electrode touches the filler metal during welding, the welder must _____. Post by: medes1 on Feb 23, 2018 Title: If the tungsten electrode touches the filler metal during welding, the welder must _____. Post by: LU DEE on Feb 23, 2018 Thank you :)
Title: If the tungsten electrode touches the filler metal during welding, the welder must _____. Post by: medes1 on Feb 23, 2018 Pleasure
|