If the rubber gasket on the radiator cap is cracked, the engine could lose power. (True or false?)

The rope starter utilizes the pull of a rope wrapped around a pulley for turning power to start the
engine. the rope and pulley have spring mechanism that rewinds the rope onto the pulley when the
starter rope is pulled.

Valves must have a valve stem clearance of about 0.010 inch, or as specified by the manufacturer. The
correct gap is achieved by grinding the end of the valve stem or by adjusting valve tappets.

Plastigage is a small threadlike material used to measure connecting rod bearing clearance. Plastigage
is a carefully designed material that flattens out uniformly when pressed. The material is laid across
the bearing surface, and the bearing cap is attached and torqued. The bearing cap is removed again,
and the width of the Plastigage measured with a special gauge.