Electrical Engineering

A 0.16 pF parallel-plate capacitor is charged to 10 V. Then the battery is disconnected from the cap

A 0.16 pF parallel-plate capacitor is charged to 10 V. Then the battery is disconnected from the cap

A 0.16 pF parallel-plate capacitor is charged to 10 V. Then the battery is disconnected from the capacitor. When 1.00 × 107 electrons are now placed on the negative plate of the capacitor, the voltage between the plates changes by

burdick729   417   N/A

burdick729

Dual functional integrated Digital Cathode Ray Oscilloscope and Digital Multimeter product.

Dual functional integrated Digital Cathode Ray Oscilloscope and Digital Multimeter product.

Is it feasible to design & construct a Dual functional integrated Digital Cathode Ray Oscilloscope and Digital Multimeter products in a single product?

Idea is to integrate the Digital Multimeter features in the Digital Cathode R

prashantakerkar   239   N/A

prashantakerkar

Globe Led Product Re-engineering.

Globe Led Product Re-engineering.

Attached image for the Globe Led product operated on 230V AC mains supply.

1 Is it possible to modify the product working on alternate source of electrical power viz Batteries?

2 Is it possible to modify the product with the Glo

prashantakerkar   279   N/A

prashantakerkar

Please assist with the following questions (Engine Diagnostics)

Please assist with the following questions (Engine Diagnostics)

10.   A vehicle fails an HC emission test at idle and 2,500 rpm, and the engine has an acceleration stumble. The heated oxygen sensor (HO2S) voltage is 0.1–0.3 volts on a scan tool, and the injector pulse width is high. No diagnostic trouble cod

aantonopoulos   618   N/A

aantonopoulos